dmesg - Gallium 0.4 on AMD PALM
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.12.21-gentoo-r1 (root@U270) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) ) #1 SMP Mon Jun 30 22:32:45 EEST 2014
Command line: BOOT_IMAGE=/boot/vmlinuz root=/dev/sda3 ro radeon.dpm=1 zswap.enabled=1
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009f99dfff] usable
BIOS-e820: [mem 0x000000009f99e000-0x000000009f9eefff] ACPI NVS
BIOS-e820: [mem 0x000000009f9ef000-0x000000009fb1dfff] reserved
BIOS-e820: [mem 0x000000009fb1e000-0x000000009fb1efff] usable
BIOS-e820: [mem 0x000000009fb1f000-0x000000009fb26fff] ACPI NVS
BIOS-e820: [mem 0x000000009fb27000-0x000000009fb4afff] reserved
BIOS-e820: [mem 0x000000009fb4b000-0x000000009fb8dfff] ACPI NVS
BIOS-e820: [mem 0x000000009fb8e000-0x000000009fcf7fff] usable
BIOS-e820: [mem 0x000000009fcf8000-0x000000009fef7fff] reserved
BIOS-e820: [mem 0x000000009fef8000-0x000000009fefffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Micro-Star International Co., Ltd. U270 series/MS-1245, BIOS E1245AMS.10J 06/24/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 09FF00000 mask FFFF00000 uncachable
2 base 0A0000000 mask FE0000000 uncachable
3 base 0C0000000 mask FC0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000013f000000 aka 5104M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 2559MB, range: 1MB, type UC
reg 2, base: 2560MB, range: 512MB, type UC
reg 3, base: 3GB, range: 1GB, type UC
total RAM covered: 2559M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2559MB, range: 1MB, type UC
e820: update [mem 0x9ff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9ff00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01e8e000, 0x01e8efff] PGTABLE
BRK [0x01e8f000, 0x01e8ffff] PGTABLE
BRK [0x01e90000, 0x01e90fff] PGTABLE
init_memory_mapping: [mem 0x13ee00000-0x13effffff]
[mem 0x13ee00000-0x13effffff] page 2M
BRK [0x01e91000, 0x01e91fff] PGTABLE
init_memory_mapping: [mem 0x13c000000-0x13edfffff]
[mem 0x13c000000-0x13edfffff] page 2M
init_memory_mapping: [mem 0x100001000-0x13bffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13bffffff] page 2M
BRK [0x01e92000, 0x01e92fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x9f99dfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x9f7fffff] page 2M
[mem 0x9f800000-0x9f99dfff] page 4k
init_memory_mapping: [mem 0x9fb1e000-0x9fb1efff]
[mem 0x9fb1e000-0x9fb1efff] page 4k
BRK [0x01e93000, 0x01e93fff] PGTABLE
init_memory_mapping: [mem 0x9fb8e000-0x9fcf7fff]
[mem 0x9fb8e000-0x9fcf7fff] page 4k
init_memory_mapping: [mem 0x9fef8000-0x9fefffff]
[mem 0x9fef8000-0x9fefffff] page 4k
ACPI: RSDP 00000000000f0430 00024 (v02 MSI_NB)
ACPI: XSDT 000000009f9e3070 0005C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: FACP 000000009f9e9e18 000F4 (v04 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130725/tbfadt-603)
ACPI: DSDT 000000009f9e3158 06CBF (v02 MSI_NB MEGABOOK 00000000 INTL 20051117)
ACPI: FACS 000000009fb26f80 00040
ACPI: APIC 000000009f9e9f10 00062 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: MCFG 000000009f9e9f78 0003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00010013)
ACPI: SLIC 000000009f9e9fb8 00176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: HPET 000000009f9ea130 00038 (v01 MSI_NB MEGABOOK 01072009 AMI 00000004)
ACPI: SSDT 000000009f9ea168 00448 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 000000009f9ea5b0 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ae00000-ffff88013e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x9f99dfff]
node 0: [mem 0x9fb1e000-0x9fb1efff]
node 0: [mem 0x9fb8e000-0x9fcf7fff]
node 0: [mem 0x9fef8000-0x9fefffff]
node 0: [mem 0x100001000-0x13effffff]
On node 0 totalpages: 912044
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 10157 pages used for memmap
DMA32 zone: 650001 pages, LIFO batch:31
Normal zone: 4032 pages used for memmap
Normal zone: 258047 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
e820: [mem 0x9ff00000-0xdfffffff] available for PCI devices
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88013ec00000 s79808 r8192 d22592 u1048576
pcpu-alloc: s79808 r8192 d22592 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 897770
Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=/dev/sda3 ro radeon.dpm=1 zswap.enabled=1
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Memory: 3503308K/3648176K available (7938K kernel code, 736K rwdata, 2796K rodata, 928K init, 916K bss, 144868K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
NO_HZ: Full dynticks CPUs: 1.
NR_IRQS:4352 nr_irqs:512 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1646.320 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3292.64 BogoMIPS (lpj=1646320)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
tseg: 009ff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 24K (ffffffff81da2000 - ffffffff81da8000)
ACPI: Core revision 20130725
ACPI: All ACPI Tables successfully acquired
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD E-450 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
MCE: In-kernel MCE decoding enabled.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors # 1 OK
Brought up 2 CPUs
smpboot: Total of 2 processors activated (6585.28 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9f99e000-0x9f9eefff] (331776 bytes)
PM: Registering ACPI NVS region [mem 0x9fb1f000-0x9fb26fff] (32768 bytes)
PM: Registering ACPI NVS region [mem 0x9fb4b000-0x9fb8dfff] (274432 bytes)
xor: measuring software checksum speed
prefetch64-sse: 3540.000 MB/sec
generic_sse: 3280.000 MB/sec
xor: using function: prefetch64-sse (3540.000 MB/sec)
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
raid6: sse2x1 1277 MB/s
raid6: sse2x2 1593 MB/s
raid6: sse2x4 2296 MB/s
raid6: using algorithm sse2x4 (2296 MB/s)
raid6: using ssse3x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Detected MSI hardware, enabling workarounds.
ACPI: EC: Look up EC in DSDT
ACPI Error: No handler for Region [EC__] (ffff88013a828a20) [EmbeddedControl] (20130725/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130725/exfldio-305)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC__._REG] (Node ffff88013a8297f8), AE_NOT_EXIST (20130725/psparse-536)
ACPI Error: No handler for Region [EC__] (ffff88013a828a20) [EmbeddedControl] (20130725/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130725/exfldio-305)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC__._REG] (Node ffff88013a8297f8), AE_NOT_EXIST (20130725/psparse-536)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
acpi PNP0A03:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
pci 0000:00:01.0: [1002:9806] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4394] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb4c000-0xfeb4c3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 03-05]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xfdf00000-0xfe8fffff]
pci 0000:00:15.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:06:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfea00000-0xfea01fff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 06]
pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:07:00.0: [10ec:8176] type 00 class 0x028000
pci 0000:07:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:07:00.0: reg 0x18: [mem 0xfe900000-0xfe903fff 64bit]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 07]
pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x9f99e000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fb1f000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fcf8000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9ff00000-0x9fffffff]
e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
cfg80211: Calling CRDA to update world regulatory domain
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [mem 0x00000550-0x0000055f] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:09: Plug and Play ACPI device, IDs STLc000 SYN1507 ETD0001 PNP0f13 (active)
system 00:0a: [mem 0xa0000000-0xbfffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:04.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
pci 0000:00:04.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf01fffff]
pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:15.0: PCI bridge to [bus 03-05]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xfdf00000-0xfe8fffff]
pci 0000:00:15.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:15.1: PCI bridge to [bus 06]
pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:15.2: PCI bridge to [bus 07]
pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:01: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0xc0000000-0xffffffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe8fffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfe900000-0xfe9fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:01.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9b99e000-0x9f99e000] (64MB) mapped at [ffff88009b99e000-ffff88009f99dfff]
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
microcode: CPU0: patch_level=0x05000101
microcode: CPU1: patch_level=0x05000101
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
sha512_ssse3: Using SSSE3 optimized SHA-512 implementation
audit: initializing netlink socket (disabled)
type=2000 audit(1404410587.950:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
bio: create slab at 1
Btrfs loaded
msgmni has been set to 6842
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
Non-volatile memory driver v1.3
ACPI: AC Adapter [ADP1] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0a/PNP0C09:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (59 C)
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x1462:0x1096).
[drm] register mmio base: 0xFEB00000
[drm] register mmio size: 262144
ATOM BIOS: AMD
radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 1751666 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading PALM Microcode
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009b5a9c00
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009b5a9c0c
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010232118
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: irq 40 for MSI/MSI-X
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
ACPI: Battery Slot [BAT1] (battery present)
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS-1
[drm] HPD1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller without fan control
== power state 0 ==
ui class: none
internal class: uvd_hd
caps:
uvd vclk: 38824 dclk: 30000
power level 0 sclk: 27500 vddc: 863
status:
== power state 1 ==
ui class: none
internal class: uvd
caps:
uvd vclk: 55000 dclk: 41250
power level 0 sclk: 50770 vddc: 925
status:
== power state 2 ==
ui class: battery
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 27500 vddc: 863
status:
== power state 3 ==
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 27500 vddc: 863
power level 1 sclk: 50770 vddc: 925
status:
== power state 4 ==
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 vddc: 950
status: c r b
== power state 5 ==
ui class: none
internal class: thermal
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 17369 vddc: 863
status:
[drm] Found smc ucode version: 0x00010601
switching from power state:
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 vddc: 950
status: c b
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 27500 vddc: 863
power level 1 sclk: 50770 vddc: 925
status: r
[drm] radeon: dpm initialized
[drm] fb mappable at 0xC0477000
[drm] vram apper at 0xC0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
tsc: Refined TSC clocksource calibration: 1646.497 MHz
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
radeon 0000:00:01.0: registered panic notifier
[drm] Initialized radeon 2.34.0 20080528 for 0000:00:01.0 on minor 0
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c280 irq 19
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 41 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffc90000064000, 6c:62:6d:34:e3:d1, XID 0c200000 IRQ 41
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
rtlwifi: wireless switch is on
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4a000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.12.21-gentoo-r1 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb48000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.12.21-gentoo-r1 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4b000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.12.21-gentoo-r1 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb49000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.12.21-gentoo-r1 ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 44 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.12.21-gentoo-r1 xhci_hcd
usb usb5: SerialNumber: 0000:06:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.12.21-gentoo-r1 xhci_hcd
usb usb6: SerialNumber: 0000:06:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
serio: i8042 KBD port at 0x60,0x64 irq 1
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb20
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
msi_laptop: Identified laptop model 'MSI U270'
msi_laptop: Brightness ignored, must be controlled by ACPI video driver
input: MSI Laptop hotkeys as /devices/virtual/input/input4
msi_laptop: driver 0.5 successfully loaded
input: MSI WMI hotkeys as /devices/virtual/input/input5
snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
ata1.00: ATA-8: WDC WD3200BPVT-22ZEST0, 01.01A01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
registered taskstats version 1
zswap: loading zswap
zswap: using lzo compressor
acpi-cpufreq: overriding BIOS provided _PSD data
sda: sda1 sda2 sda3 sda4
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
sd 0:0:0:0: [sda] Attached SCSI disk
EDD information not available.
ALSA device list:
#0: HD-Audio Generic at 0xfeb44000 irq 45
#1: HDA ATI SB at 0xfeb40000 irq 16
Switched to clocksource tsc
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
psmouse serio1: sentelic: Finger Sensing Pad, hw: 13.2.1, sn: 0, sw: 1.1.0-K
input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input10
btrfs: device fsid db610a4f-2552-4edd-a2a3-bcca02fba4d7 devid 1 transid 72474 /dev/sda3
VFS: Mounted root (btrfs filesystem) readonly on device 0:15.
devtmpfs: mounted
Freeing unused kernel memory: 928K (ffffffff81cba000 - ffffffff81da2000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 240K (ffff8800017c4000 - ffff880001800000)
Freeing unused kernel memory: 1300K (ffff880001abb000 - ffff880001c00000)
systemd-udevd[1317]: starting version 212
btrfs: device fsid db610a4f-2552-4edd-a2a3-bcca02fba4d7 devid 1 transid 72474 /dev/sda3
btrfs: device fsid ca87ad76-b485-44d6-b28f-5dae7f49554c devid 1 transid 80486 /dev/sda4
BTRFS debug (device sda3): unlinked 211 orphans
Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k FS
btrfs: device fsid ca87ad76-b485-44d6-b28f-5dae7f49554c devid 1 transid 80486 /dev/sda4
btrfs: use lzo compression
NTFS driver 2.1.30 [Flags: R/O MODULE].
NTFS volume version 3.1.
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from 20:4e:7f:5a:fd:30 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.003 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 1193.742 msecs
PM: late suspend of devices complete after 0.289 msecs
pcieport 0000:00:15.1: System wakeup enabled by ACPI
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 54.652 msecs
ACPI: Preparing to enter system sleep state S3
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
LVT offset 0 assigned for vector 0x400
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
CPU1 is up
ACPI: Waking up from system sleep state S3
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
pcieport 0000:00:15.1: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 88.063 msecs
PM: early resume of devices complete after 0.157 msecs
[drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009b5a9c00
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009b5a9c0c
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010232118
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
pcieport 0000:00:15.0: System wakeup disabled by ACPI
rtlwifi: wireless switch is on
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
[drm] ib test on ring 5 succeeded
[drm] Found smc ucode version: 0x00010601
switching from power state:
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 vddc: 950
status: c b
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 27500 vddc: 863
power level 1 sclk: 50770 vddc: 925
status: r
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 3259.957 msecs
Restarting tasks ... done.
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
perf samples too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: Connection to AP 20:4e:7f:5a:fd:30 lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: Connection to AP 20:4e:7f:5a:fd:30 lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e072 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e072 ' to make it known.
msi_wmi: Unknown event received
[Firmware Bug]: battery: (dis)charge rate invalid.
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=2)
wlan0: associated
atkbd serio0: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e071 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e071 ' to make it known.
msi_wmi: Unknown event received
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 12174 at net/mac80211/agg-tx.c:694 ieee80211_start_tx_ba_cb+0x1b9/0x1f0()
Modules linked in: ntfs
CPU: 0 PID: 12174 Comm: kworker/u4:2 Not tainted 3.12.21-gentoo-r1 #1
Hardware name: Micro-Star International Co., Ltd. U270 series/MS-1245, BIOS E1245AMS.10J 06/24/2011
Workqueue: phy0 ieee80211_iface_work
0000000000000009 ffff88004e5dbcf8 ffffffff817b4149 0000000000000007
0000000000000000 ffff88004e5dbd38 ffffffff8108f4a7 ffff88009ad285e0
0000000000000000 ffff88013a086800 ffff880098416b10 ffff88009ad28800
Call Trace:
[] dump_stack+0x55/0x76
[] warn_slowpath_common+0x87/0xb0
[] warn_slowpath_null+0x15/0x20
[] ieee80211_start_tx_ba_cb+0x1b9/0x1f0
[] ieee80211_iface_work+0x21a/0x330
[] process_one_work+0x185/0x460
[] worker_thread+0x118/0x380
[] ? rescuer_thread+0x350/0x350
[] kthread+0xbb/0xc0
[] ? kthread_create_on_node+0x130/0x130
[] ret_from_fork+0x7c/0xb0
[] ? kthread_create_on_node+0x130/0x130
---[ end trace 55328da3cb5b337d ]---
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: Connection to AP 20:4e:7f:5a:fd:30 lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: Connection to AP 20:4e:7f:5a:fd:30 lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e072 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e072 ' to make it known.
msi_wmi: Unknown event received
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from 20:4e:7f:5a:fd:30 (Reason: 7)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 20:4e:7f:5a:fd:30
wlan0: send auth to 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:5a:fd:30 (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:5a:fd:30 (capab=0x431 status=0 aid=1)
wlan0: associated
switching from power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 27500 vddc: 863
power level 1 sclk: 50770 vddc: 925
status: c
switching to power state:
ui class: none
internal class: uvd
caps:
uvd vclk: 55000 dclk: 41250
power level 0 sclk: 50770 vddc: 925
status: r
switching from power state:
ui class: none
internal class: uvd
caps:
uvd vclk: 55000 dclk: 41250
power level 0 sclk: 50770 vddc: 925
status: c
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 27500 vddc: 863
power level 1 sclk: 50770 vddc: 925
status: r
switching from power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 27500 vddc: 863
power level 1 sclk: 50770 vddc: 925
status: c
switching to power state:
ui class: none
internal class: uvd
caps:
uvd vclk: 55000 dclk: 41250
power level 0 sclk: 50770 vddc: 925
status: r
switching from power state:
ui class: none
internal class: uvd
caps:
uvd vclk: 55000 dclk: 41250
power level 0 sclk: 50770 vddc: 925
status: c
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 27500 vddc: 863
power level 1 sclk: 50770 vddc: 925
status: r